On-Demand:
Identifying Appropriate Fire and Explosion Hazard Data for your Unit Operations
Manufacturers need to understand if their materials are flammable, and what risks are inherent in the material being handled. The storage, processing, handling, and packaging of materials create potentially hazardous conditions in the workplace with a risk of fire and explosion.
To mitigate the risk of fire and explosion, industry is required under different Health & Safety legislation, for example, DSEAR/ATEX/NFPA in the UK/EU/USA and in some cases with the added compliance requirement of COMAH/Seveso to undertake adequate risk assessment and identify hazardous areas.
To perform risk assessments a Materials Safety Data Sheet (MSDS) is used to understand the physical properties of the material being processed. Although, MSDS data provided can help, it is not always comprehensive enough for the specificities of your process conditions/unit operations and may result in expensive over-engineering.
What you’ll learn:
- The relationship between materials, the testing suite and what information each test provides on their potential flammability and explosivity.
- How to use testing information to support your basis of safety for unit operations and what you should do if you receive unexpected results.
- Partnering with Sigma-HSE to create a cost effective testing scheme to match your unit operations and materials inventory.
This webinar is best for:
- Safety Engineers
- Environmental Health Safety Specialist
- Risk Engineers
- Process Engineers and Process Designers
- EHS Specialists, Managers, Supervisors and Engineers
Register for free
Technical Speaker – Dr Andrew Fowler, Director, Sigma-HSE
Dr Fowler received his BSc and PhD in Surface Chemistry from the University of Durham in 1984. He has sixteen years of experience as an HSE Process Safety Specialist Inspector covering field inspections, major hazards, and safety policy development. During his time at the HSE, Dr Fowler authored guidance publications and staff training manuals.
Following an accomplished career in the UK HSE, Dr Fowler gained a wealth of commercial consultancy experience. During this time, he completed multiple process safety management audits and published bespoke staff training programs.
