sigma-hse-logo
sigma-hse-logo-expanded
sigma-hse-logo-expanded

On-Demand Webinar: Avoid Over Zoning on 
Hazardous Area Classification (HAC)

10:00am (EDT) Thursday June 13, 2024

A Hazardous Area Classification (HAC) classifies an operational area based primarily on the likelihood of the presence of a flammable atmosphere (the combination of a fuel in oxidant (typically air). HAC is a necessary starting point for process risk assessments because, without it, you cannot identify potential ignition sources within your hazardous zones.

Hazardous Area Classification (HAC)

This webinar will provide an understanding of:

  • How to identify and classify hazardous zones for dusts and gases in your processing operations
  • How to effectively select equipment via proactive (rather than blanket) zoning to achieve better ROI
  • How to use zonal information i.e., EPL, Ga or Da, Gb or Db, and of Gc or Dc to ensure that the equipment you have selected is suitable for your operations

This webinar is best for:

  • Technical Managers
  • HSE/EHS Managers
  • Process/Technical/Safety Engineers
  • Process Hazard Analysts
  • EHS Engineers/Coordinators

Register for free

Sigma-HSE uses the contact information provided to contact you. You may unsubscribe from our communications via a link at the bottom of our emails at any time. Our privacy policy and our commitment to the protection of your privacy is outlined in our Privacy Statement.
We would like to share details of our work, webinars you can attend, insights, case studies and fact sheets with you. To do this, we need to hold some of your personal information, including your full name, job title, organisation name and email address.
Andy-fowler-image.jpg

Technical Speaker – Dr Andrew Fowler, Director, Sigma-HSE

Dr Fowler received his BSc and PhD in Surface Chemistry from the University of Durham in 1984. He has sixteen years of experience as an HSE Process Safety Specialist Inspector covering field inspections, major hazards, and safety policy development. During his time at the HSE, Dr Fowler authored guidance publications and staff training manuals.

Following an accomplished career in the UK HSE, Dr Fowler gained a wealth of commercial consultancy experience. During this time, he completed multiple process safety management audits and published bespoke staff training programs.

General enquiries

Are you visiting Sigma-HSE from outside your region? Visit your regional site for more relevant process safety solutions.